Axial Condensers
Axial Condensers
Available in a wide range of configurations, STULZ Tecnivel axial units offer a wide range of solutions, covering a spectrum of dissipation capacities ranging from 10 to 800 kW.
Product Overview
Its purpose is to dissipate the heat absorbed by a refrigerant fluid *, which circulates through the exchanger, condensing it, by transferring this heat to the air that circulates through the exchanger.
* Fluids to be used: R-134a, R407C, R513A and R-410A. Contact the manufacturer for analysis and approval of the use of a refrigerant other than those prescribed.
Axial fans:
- AC and EC
- Static and dynamic balancing
- High performance aerodynamic
- Low sound levels
Heat exchangers for refrigerant charging and condensation control:
- Slotted tube and corrugated fin to optimize heat transfer
- Microchannel
- Coil: double or single
- Layouts following to air flow direction: horizontal, vertical or “V”
- Configured with one or two rows of fans, from 1 to 12 per unit
- Optional: Electrical panel and control devices
- Capacity (kW): 9 – 820
- Air Flow (m3 / h): 6000 – 160000
- Models: 94
- Dimensions (H × W):
- Min. 760 x 885 mm
- Max. 2410 x 5750 mm
| CAS / CASV | |
|---|---|
| Description / Materials | Axial condensers built with self-supporting battery in aluminum sheet. Coil built with slotted Cu tubes and lacquered Al / Al fins. 500, 630 and 800 mm diameter fans. |
| Battery | Pipes 7mm, 3/8* y 1/2* y fins AI/AI laquered Cu |
| Dimensions | Width from 1010/1020 mm. Length from 1090 to 2560 mm. |
| Sizes / Models | 37 |
| Powers | 37 to 130 Kw *DT15C |
| Fluid | R410A; R407C; R134a; R-513A |
| Fans | 1 to 4 |
| Batteries by | 1 or 2 |
| Air direction | Vertical or Horizontal |
| Motor | EC / AC |
| Airflow | 10500 to 74.000 m3/h |
| CAMS / CAMSV | |
|---|---|
| Description / Materials | Axial capacitors built with self-supporting battery in aluminum sheet. Microchannel battery built in Al. 500 and 630 mm diameter fans. |
| Coil | Microchannel coil |
| Measures | Width of 1000 mm. and 2000mm. |
| Sizes / Models | 6 |
| Powers | 43 to 75 Kw *DT15C |
| Fluid type | R410A; R-134a; R-513A; R407C |
| Fans | 1 to 2 |
| Coils per equipment | 1 or 2 |
| Air direction | Vertical or Horizontal |
| Motor | EC |
| Air flow | 12000 to 18000 m3/h |
Need more information?
Download our brochure!
All details about Axial Condensers
Modular Constructions
Design adapted to the project
Modular constructions from 1 to 10 fans, with a frame in galvanized sheet or other materials adaptable to the requirements of the installation.
To custom design the condenser that adapts to your air conditioning system we will need some simple data with the operating conditions of the installation such as temperature, refrigerant, voltage and location among others, and we will offer you the selection of the most suitable equipment according to efficiency, dimensions, sound levels and price.
Consult the different options, request a personalized study and we will manufacture the required capacitor upon request according to the parameters of your installation.
Download below the file to carry out the study.
Selection Software
STULZ Product Selector
Design your condenser quickly and easily
With a few simple data with the operating conditions of the installation such as temperature, refrigerant, voltage and location among others, the software will carry out an exhaustive thermodynamic calculation and will offer you different selectable equipment according to efficiency, dimensions, sound levels or price.
- Intuitive tool
- Reliable and fast selection
- User friendly interface
- Technical sheets with dimensioning and prices of the units
- Multiplatform, on any device and at any time
- Multilingual Software
